The University of Greenwich is a British, London based university.

It has 3 campuses in south-east London and north Kent. It is the largest university in London by student numbers (app. 24,000) and the greenest in the UK in 2012 as assessed by The People & Planet Green League. Since 2010, the university is constantly ranked #1 in terms of student satisfaction across all 20 listed universities in London.

The Faculty of Engineering and Science is responsible for the majority of the academic provision of the University of Greenwich at the Medway campus.

The faculty includes disciplines of Engineering, Science, Pharmacy, as well as the Natural Resources Institute (NRI).
The aim of the project is to:

Explore a range of technologies that are used all over the world to perform the class attendee’s registration on a semi or fully automated basis.

The objectives of the project are to:
1. Describe in detail three state-of-art student semi or fully automated registration technologies, compare their advantages and disadvantages in-between as well as with existing university registration procedure;

2. Carry out cost-effective analysis and propose how much it will cost to implement top-two preferred semi or fully automated registration technologies at the School of Engineering & Science at Medway (based on type of the selected technologies, total number of teaching rooms, support staff and maintenance costs should considered).

This is an individual research project and you will not have an academic support staff to guide you through the expected report progress.

Please take this work very seriously and consult ‘Report structure & assessment’ section to familiarise with report requirements.

2
Report structure & assessment
Please refer to the table below for the suggested report structure and assessment criteria. This may have to be altered slightly from project to project, however the core should remain the same.
The report layout: font, margins, etc., are to be selected individually. If there is no Appendix section in the report the Reference section should be presented separately.

The number of pages for sections 6-11 is given as a guideline only and may vary from report to report.

Report structure & marks:
No
Title
Description / Information
Pages
Words
Weight 1 Header sheet Include as first page of your report (Available through Banner). 1 1%
2
Title page
Include: University, Department, Programme, Course, report title, your name, banner ID, year, and number of words.
1
1% 3 Content Content page 1 1%
4
List of Tables
List of Tables
1
1% 5 List of Figures List of Figures 1 1%
6
Introduction
Background information about the client and the project that you were working on.
1
1000
–
6000
5% 7 Methodology Detailed description of adapted methods, explanation and justification of the choice and how these are appropriate. *Extra material can be presented in the Appendix. 1-3 10%
8
Results
This section should get down to the point and present the results & findings which were discovered through the progress of the project.
2-10
40% 9 Conclusions Overview of the results with analysis and conclusions. If desired, the analysis section can be combined with results. It should also reflect how the project objectives have been met. 2-4 20%
10
Recommendations
A set of clear recommendations have to be outlined as a guideline for the client to follow. Either on how to use the generated data/material etc., or how to enhance the results and extra matters which should be considered.
2-3
10% 11 Appendix This should include any extra figures, tables, questionnaires Q&A, links, references, etc. (all you think is relevant and supports your work). <20 5%
Consistent formatting & page numbering through all of the report.

Place your order now for a similar paper and have exceptional work written by our team of experts to guarantee you A Results

Why Choose US

6+ years experience on custom writing
80% Return Client
Urgent 2 Hrs Delivery
Your Privacy Guaranteed

University Attendance Registration System

Order Description

MARK 1174
Coursework
Individual Report

Report outline
About the client:

The University of Greenwich is a British, London based university.

It has 3 campuses in south-east London and north Kent. It is the largest university in London by student numbers (app. 24,000) and the greenest in the UK in 2012 as assessed by The People & Planet Green League. Since 2010, the university is constantly ranked #1 in terms of student satisfaction across all 20 listed universities in London.

The Faculty of Engineering and Science is responsible for the majority of the academic provision of the University of Greenwich at the Medway campus.

The faculty includes disciplines of Engineering, Science, Pharmacy, as well as the Natural Resources Institute (NRI).
The aim of the project is to:

Explore a range of technologies that are used all over the world to perform the class attendee’s registration on a semi or fully automated basis.

The objectives of the project are to:
1. Describe in detail three state-of-art student semi or fully automated registration technologies, compare their advantages and disadvantages in-between as well as with existing university registration procedure;

2. Carry out cost-effective analysis and propose how much it will cost to implement top-two preferred semi or fully automated registration technologies at the School of Engineering & Science at Medway (based on type of the selected technologies, total number of teaching rooms, support staff and maintenance costs should considered).

This is an individual research project and you will not have an academic support staff to guide you through the expected report progress.

Please take this work very seriously and consult ‘Report structure & assessment’ section to familiarise with report requirements.

2
Report structure & assessment
Please refer to the table below for the suggested report structure and assessment criteria. This may have to be altered slightly from project to project, however the core should remain the same.

The report layout: font, margins, etc., are to be selected individually. If there is no Appendix section in the report the Reference section should be presented separately.

The number of pages for sections 6-11 is given as a guideline only and may vary from report to report.

Report structure & marks:
No
Title
Description / Information
Pages
Words
Weight 1 Header sheet Include as first page of your report (Available through Banner). 1 1%
2
Title page
Include: University, Department, Programme, Course, report title, your name, banner ID, year, and number of words.
1
1% 3 Content Content page 1 1%
4
List of Tables
List of Tables
1
1% 5 List of Figures List of Figures 1 1%
6
Introduction
Background information about the client and the project that you were working on.
1
1000
–
6000
5% 7 Methodology Detailed description of adapted methods, explanation and justification of the choice and how these are appropriate. *Extra material can be presented in the Appendix. 1-3 10%
8
Results
This section should get down to the point and present the results & findings which were discovered through the progress of the project.
2-10
40% 9 Conclusions Overview of the results with analysis and conclusions. If desired, the analysis section can be combined with results. It should also reflect how the project objectives have been met. 2-4 20%
10
Recommendations
A set of clear recommendations have to be outlined as a guideline for the client to follow. Either on how to use the generated data/material etc., or how to enhance the results and extra matters which should be considered.
2-3
10% 11 Appendix This should include any extra figures, tables, questionnaires Q&A, links, references, etc. (all you think is relevant and supports your work). <20 5%
Consistent formatting & page numbering through all of the report.
5

University Attendance Registration System

Order Description

MARK 1174
Coursework
Individual Report

Report outline
About the client:

The University of Greenwich is a British, London based university.

It has 3 campuses in south-east London and north Kent. It is the largest university in London by student numbers (app. 24,000) and the greenest in the UK in 2012 as assessed by The People & Planet Green League. Since 2010, the university is constantly ranked #1 in terms of student satisfaction across all 20 listed universities in London.

The Faculty of Engineering and Science is responsible for the majority of the academic provision of the University of Greenwich at the Medway campus.

The faculty includes disciplines of Engineering, Science, Pharmacy, as well as the Natural Resources Institute (NRI).
The aim of the project is to:

Explore a range of technologies that are used all over the world to perform the class attendee’s registration on a semi or fully automated basis.

The objectives of the project are to:
1. Describe in detail three state-of-art student semi or fully automated registration technologies, compare their advantages and disadvantages in-between as well as with existing university registration procedure;

2. Carry out cost-effective analysis and propose how much it will cost to implement top-two preferred semi or fully automated registration technologies at the School of Engineering & Science at Medway (based on type of the selected technologies, total number of teaching rooms, support staff and maintenance costs should considered).

This is an individual research project and you will not have an academic support staff to guide you through the expected report progress.

Please take this work very seriously and consult ‘Report structure & assessment’ section to familiarise with report requirements.

2
Report structure & assessment
Please refer to the table below for the suggested report structure and assessment criteria. This may have to be altered slightly from project to project, however the core should remain the same.

The report layout: font, margins, etc., are to be selected individually. If there is no Appendix section in the report the Reference section should be presented separately.

The number of pages for sections 6-11 is given as a guideline only and may vary from report to report.

Report structure & marks:
No
Title
Description / Information
Pages
Words
Weight 1 Header sheet Include as first page of your report (Available through Banner). 1 1%
2
Title page
Include: University, Department, Programme, Course, report title, your name, banner ID, year, and number of words.
1
1% 3 Content Content page 1 1%
4
List of Tables
List of Tables
1
1% 5 List of Figures List of Figures 1 1%
6
Introduction
Background information about the client and the project that you were working on.
1
1000
–
6000
5% 7 Methodology Detailed description of adapted methods, explanation and justification of the choice and how these are appropriate. *Extra material can be presented in the Appendix. 1-3 10%
8
Results
This section should get down to the point and present the results & findings which were discovered through the progress of the project.
2-10
40% 9 Conclusions Overview of the results with analysis and conclusions. If desired, the analysis section can be combined with results. It should also reflect how the project objectives have been met. 2-4 20%
10
Recommendations
A set of clear recommendations have to be outlined as a guideline for the client to follow. Either on how to use the generated data/material etc., or how to enhance the results and extra matters which should be considered.
2-3
10% 11 Appendix This should include any extra figures, tables, questionnaires Q&A, links, references, etc. (all you think is relevant and supports your work). <20 5%
Consistent formatting & page numbering through all of the report.
5