The premise is that all supply chain activities fit into these five buckets
Plan
Source
Make
Deliver
Return

1.. Firm G is committed to providing the best protection and mobility to our warfighters
The M-ATV manufactured by HPP Corporation is intended to meet the requirement of the environment such as Afghanistan
Explore the type of supply chain required for this vehicle. In doing so. Be sure to
A. Assess performance requirements and Rank in order of importance
1) Speed
2) Reliability
3) Cost
B. Illustrate the recommended design
1) Using the Plan, Source, Make/Maintain/Repair, Deliver, Return JSCA framework (The Joint Supply Chain Architecture (JSCA) is an important DoD) initiative that has the objective of improving the effectiveness of the DoD’s supply chain), draw a picture of what the deliver recommended supply chain should look like with particular emphasis on delivery exception
2.. Develop the answer based on the facts presented below:
The M-ATV is urgently required in large numbers by the warfighter, currently engaged in operations and in harm’s way
Facts
C. Demand for the new vehicle has exceeded the forecast and the manufacturer is producing as fast as it can
D. Because of the sudden increase in demand 30% of the vehicles are missing key components and are awaiting shipments from HPP suppliers. The vehicle can await parts either in the state or overseas.
E. The vehicle can be moved by air to the warfighter, but that movement costs 10x surface transport
F. Transportation by air takes 5 days and transportation via sea asset takes 45 days

4… Write an Supply chain analysis answering the information below based on the a,b and the facts c,d, e, f,
• three differents courses of action,
• describes the pros and cons of each each
• prepare an executive –level decision brief.
• draw a picture of what the deliver recommended supply chain should look like with particular emphasis on delivery exception
• Discuss the resource implications

Supply Chain Management

1. Develop a literature review on your topic.

2. Expand on the topic of supply chain
network optimization in the paper and explain why supply chain network
optimization is vital to designing and implementing an optimized supply
chain. Again, make sure the reader understands big picture: What is supply
chain management? Why is supply chain management important for retail?
What can a retailer do if there supply chain isn’t cost effective? The
answer is conduct supply chain network optimization to identify where the
supply chain isn’t optimal. Why was it important for Dell to conduct
supply chain network optimization?

3. Add the slide from the Power Point on the
Perfect Order and expand upon why the Five P’s of retail are so
important to the success of a retailer. Explain how Dell didn’t focus
on the Five P’s of retailing and that they simply assumed that the
systems and process in place to service their business and online
consumers would be adequate to serve retailers.

4. Justify your methodology. Explain why you
chose the methodology to resolve the issues. If I understand you
correctly, your final goal is to â??Designâ? a process to eliminate the
logistical problems and â??Indentifyâ? opportunities to reduce costs.
And, you will achieve the goal by first evaluating their as-is process and
moving on to solutions from there. In the methodology, you need to explain
in detail how you evaluated their process, proving the rationale of your
evaluation. By doing this readers can understand and agree with the
process from evaluation to suggesting solutions. The rationale can be what
you find from literature or of other business examples. Based on what you
have presented in the paper at this point, readers are not able to
determine whether your solutions were correct. Readers need to see
whether you followed the appropriate procedure and logical reasoning to
reach the conclusion, in this case, your solution. I think, this is the
difference between studying as a student and working as a professional. In
the real business world, your solutions can be evaluated mostly by
outcomes. However, your Masterâ?™s paper is a studentâ?™s
academic work. The procedure that you followed to come up with the
solutions is as important as the outcome that the solutions resulted in.
This is what you needed to work on for your degree in addition to what you
did for your job.

aper. http://www.ndsu.edu/gradschool/graduating_students/dtp/format/

Supply Chain Management

1. Develop a literature review on your topic.

2. Expand on the topic of supply chain
network optimization in the paper and explain why supply chain network
optimization is vital to designing and implementing an optimized supply
chain. Again, make sure the reader understands big picture: What is supply
chain management? Why is supply chain management important for retail?
What can a retailer do if there supply chain isn’t cost effective? The
answer is conduct supply chain network optimization to identify where the
supply chain isn’t optimal. Why was it important for Dell to conduct
supply chain network optimization?

3. Add the slide from the Power Point on the
Perfect Order and expand upon why the Five P’s of retail are so
important to the success of a retailer. Explain how Dell didn’t focus
on the Five P’s of retailing and that they simply assumed that the
systems and process in place to service their business and online
consumers would be adequate to serve retailers.

4. Justify your methodology. Explain why you
chose the methodology to resolve the issues. If I understand you
correctly, your final goal is to â??Designâ? a process to eliminate the
logistical problems and â??Indentifyâ? opportunities to reduce costs.
And, you will achieve the goal by first evaluating their as-is process and
moving on to solutions from there. In the methodology, you need to explain
in detail how you evaluated their process, proving the rationale of your
evaluation. By doing this readers can understand and agree with the
process from evaluation to suggesting solutions. The rationale can be what
you find from literature or of other business examples. Based on what you
have presented in the paper at this point, readers are not able to
determine whether your solutions were correct. Readers need to see
whether you followed the appropriate procedure and logical reasoning to
reach the conclusion, in this case, your solution. I think, this is the
difference between studying as a student and working as a professional. In
the real business world, your solutions can be evaluated mostly by
outcomes. However, your Masterâ?™s paper is a studentâ?™s
academic work. The procedure that you followed to come up with the
solutions is as important as the outcome that the solutions resulted in.
This is what you needed to work on for your degree in addition to what you
did for your job.

aper. http://www.ndsu.edu/gradschool/graduating_students/dtp/format/