Matlab coding correction for Electrical synchronous generator assignment

Project description

0.Read into Matlab WorkSpace data from measurements (this has been done).
1.Put this graph in one figure, use “subplot” function.
2.For each signal Vg, VI, Ig, put envelope curve – find maximum and
minimum from signal and lead the line through this points, you can use
“find” function or any other.
3.Find maximum and minimum of envelope VI, read time value for each max,
and min.
4.For time value which you found (3) read value of current Ig, and voltage
Vg.
5.Calculate direct (for max of VI) and quadrature (for min of VI)reactance
For all task you will find matlab function in Matlab Help.}}}}

the task is 90% done and now you just need to fix the file which been solved by my friend and he could not continue because he is busy…

the correction which you shall made to the file as follow :-

For all task you will find matlab function in Matlab Help.
{{{{{{{ (corrections)
0. Task was done.
1. You should plot only Vi, Vg, Ig after read data into Matlab workspace,
without any other calculations. Task almost done.
2. Do calculations for envelope curve, explanation between lines 19-26 in matlab file .
3- read every thing and every notes which written in the matlab file with (%) symbol and do correct them.
4. Find max and min values of induced voltage envelope line.(see the picture attached in the file )
5. Calculate direct (for max of VI) and quadrature (for min of
VI)reactance.}

please find me a writer who is specialist in matlab program and who can correct matlab files.

the file will be uploaded after a the order
———-
Added on 07.07.2015 02:04
I don”t want written paper … i just want any specialist in matlab file to correct the file I have done .. it is 90% done so i just need to done it with correcting the matlab file .. so please do not write any paper just correct the matlab file and upland it again …
constructions bellow :-

its just matlab code correction if know matlab it will take only 10 minutes of your time as your professional in mtalb program :-

{{{Task for you((90% done))
0.Read into Matlab WorkSpace data from measurements (this has been done).
1.Put this graph in one figure, use “subplot” function.
2.For each signal Vg, VI, Ig, put envelope curve – find maximum and
minimum from signal and lead the line through this points, you can use
“find” function or any other.
3.Find maximum and minimum of envelope VI, read time value for each max,
and min.
4.For time value which you found (3) read value of current Ig, and voltage
Vg.
5.Calculate direct (for max of VI) and quadrature (for min of VI)reactance
For all task you will find matlab function in Matlab Help.}}}}

the task is 90% done and now you just need to fix the file which been solved by my friend and he could not continue because he is busy…

the correction which you shall made to the file as follow :-

For all task you will find matlab function in Matlab Help.
{{{{{{{ (corrections)
0. Task was done.
1. You should plot only Vi, Vg, Ig after read data into Matlab workspace,
without any other calculations. Task almost done.
2. Do calculations for envelope curve, explanation between lines 19-26 in matlab file .
3- read every thing and every notes which written in the matlab file with (%) symbol and do correct them.
4. Find max and min values of induced voltage envelope line.(see the picture attached in the file )
5. Calculate direct (for max of VI) and quadrature (for min of
VI)reactance.}

Matlab coding correction for Electrical synchronous generator assignment

Project description

0.Read into Matlab WorkSpace data from measurements (this has been done).
1.Put this graph in one figure, use “subplot” function.
2.For each signal Vg, VI, Ig, put envelope curve – find maximum and
minimum from signal and lead the line through this points, you can use
“find” function or any other.
3.Find maximum and minimum of envelope VI, read time value for each max,
and min.
4.For time value which you found (3) read value of current Ig, and voltage
Vg.
5.Calculate direct (for max of VI) and quadrature (for min of VI)reactance
For all task you will find matlab function in Matlab Help.}}}}

the task is 90% done and now you just need to fix the file which been solved by my friend and he could not continue because he is busy…

the correction which you shall made to the file as follow :-

For all task you will find matlab function in Matlab Help.
{{{{{{{ (corrections)
0. Task was done.
1. You should plot only Vi, Vg, Ig after read data into Matlab workspace,
without any other calculations. Task almost done.
2. Do calculations for envelope curve, explanation between lines 19-26 in matlab file .
3- read every thing and every notes which written in the matlab file with (%) symbol and do correct them.
4. Find max and min values of induced voltage envelope line.(see the picture attached in the file )
5. Calculate direct (for max of VI) and quadrature (for min of
VI)reactance.}

please find me a writer who is specialist in matlab program and who can correct matlab files.

the file will be uploaded after a the order
———-
Added on 07.07.2015 02:04
I don”t want written paper … i just want any specialist in matlab file to correct the file I have done .. it is 90% done so i just need to done it with correcting the matlab file .. so please do not write any paper just correct the matlab file and upland it again …
constructions bellow :-

its just matlab code correction if know matlab it will take only 10 minutes of your time as your professional in mtalb program :-

{{{Task for you((90% done))
0.Read into Matlab WorkSpace data from measurements (this has been done).
1.Put this graph in one figure, use “subplot” function.
2.For each signal Vg, VI, Ig, put envelope curve – find maximum and
minimum from signal and lead the line through this points, you can use
“find” function or any other.
3.Find maximum and minimum of envelope VI, read time value for each max,
and min.
4.For time value which you found (3) read value of current Ig, and voltage
Vg.
5.Calculate direct (for max of VI) and quadrature (for min of VI)reactance
For all task you will find matlab function in Matlab Help.}}}}

the task is 90% done and now you just need to fix the file which been solved by my friend and he could not continue because he is busy…

the correction which you shall made to the file as follow :-

For all task you will find matlab function in Matlab Help.
{{{{{{{ (corrections)
0. Task was done.
1. You should plot only Vi, Vg, Ig after read data into Matlab workspace,
without any other calculations. Task almost done.
2. Do calculations for envelope curve, explanation between lines 19-26 in matlab file .
3- read every thing and every notes which written in the matlab file with (%) symbol and do correct them.
4. Find max and min values of induced voltage envelope line.(see the picture attached in the file )
5. Calculate direct (for max of VI) and quadrature (for min of
VI)reactance.}

Matlab coding correction for Electrical synchronous generator assignment

Project description

0.Read into Matlab WorkSpace data from measurements (this has been done).
1.Put this graph in one figure, use “subplot” function.
2.For each signal Vg, VI, Ig, put envelope curve – find maximum and
minimum from signal and lead the line through this points, you can use
“find” function or any other.
3.Find maximum and minimum of envelope VI, read time value for each max,
and min.
4.For time value which you found (3) read value of current Ig, and voltage
Vg.
5.Calculate direct (for max of VI) and quadrature (for min of VI)reactance
For all task you will find matlab function in Matlab Help.}}}}

the task is 90% done and now you just need to fix the file which been solved by my friend and he could not continue because he is busy…

the correction which you shall made to the file as follow :-

For all task you will find matlab function in Matlab Help.
{{{{{{{ (corrections)
0. Task was done.
1. You should plot only Vi, Vg, Ig after read data into Matlab workspace,
without any other calculations. Task almost done.
2. Do calculations for envelope curve, explanation between lines 19-26 in matlab file .
3- read every thing and every notes which written in the matlab file with (%) symbol and do correct them.
4. Find max and min values of induced voltage envelope line.(see the picture attached in the file )
5. Calculate direct (for max of VI) and quadrature (for min of
VI)reactance.}

please find me a writer who is specialist in matlab program and who can correct matlab files.

the file will be uploaded after a the order
———-
Added on 07.07.2015 02:04
I don”t want written paper … i just want any specialist in matlab file to correct the file I have done .. it is 90% done so i just need to done it with correcting the matlab file .. so please do not write any paper just correct the matlab file and upland it again …
constructions bellow :-

its just matlab code correction if know matlab it will take only 10 minutes of your time as your professional in mtalb program :-

{{{Task for you((90% done))
0.Read into Matlab WorkSpace data from measurements (this has been done).
1.Put this graph in one figure, use “subplot” function.
2.For each signal Vg, VI, Ig, put envelope curve – find maximum and
minimum from signal and lead the line through this points, you can use
“find” function or any other.
3.Find maximum and minimum of envelope VI, read time value for each max,
and min.
4.For time value which you found (3) read value of current Ig, and voltage
Vg.
5.Calculate direct (for max of VI) and quadrature (for min of VI)reactance
For all task you will find matlab function in Matlab Help.}}}}

the task is 90% done and now you just need to fix the file which been solved by my friend and he could not continue because he is busy…

the correction which you shall made to the file as follow :-

For all task you will find matlab function in Matlab Help.
{{{{{{{ (corrections)
0. Task was done.
1. You should plot only Vi, Vg, Ig after read data into Matlab workspace,
without any other calculations. Task almost done.
2. Do calculations for envelope curve, explanation between lines 19-26 in matlab file .
3- read every thing and every notes which written in the matlab file with (%) symbol and do correct them.
4. Find max and min values of induced voltage envelope line.(see the picture attached in the file )
5. Calculate direct (for max of VI) and quadrature (for min of
VI)reactance.}