24/7 online - support@tutoringspots.com
1-316-444-1378 or 44-141-628-6690
Login
I will send the films Watch all films and make all models, save files in SLDPRT and PDF3D format.Make model of wrench (missing quiz III – attachment).Create models presented in the attachments.Make assembly 1,2,3,4,5. I request the expert to help me to finish this tasks as soon as possible. If any questions please message or […]
Archive for the ‘Mechanical Engineering’ Category
Pump selection and application
September 5th, 2020 
Do references in APA form and also include the calculations in that and 2. Submit the results of your design in a neat and complete report, including a narrative description of the system, the sketches, a list of materials, and the analysis to show that your design meets the specifications.
Vibration of structures
September 1st, 2020 Hello, I need some help with the homework of mechanical vibration of structures.I send for you an example. The homework starts Friday 6/19/2020 at 3.30 p.m. GMT+2 and it will take two hours. I put also correction of this example. Thanks in advance for your help..
Design PLC logic
August 28th, 2020 You are designing the PLC logic for a walk-in freezer at a commercial restaurant. Most of the refrigeration equipment is located on the roof (controller, compressor, condenser) and the rest is located inside the freezer (expansion valve, evaporator). A pair of thermostats inside the freezer send a request for cooling signal and a cooling satisfied […]
wind turbine
August 28th, 2020 Wind energy generation is an increasingly important contribution to the UKs electricity supply, currently supplying 20% of the UKs electricity. Large offshore wind farms are being designed to increase this still further, but there are considerable design challenges associated with these structures. This task focuses on the design of an offshore wind turbine.A wind turbine […]
Professional practice and contribution
August 21st, 2020 This assessment is related to a group project that have been submitted by four students. I have attached the project under the name of “final report assessment 2.” My part on this project was from 2.1 to 2.2.1 which is:2.1 – Design a photovoltaic solar system to provide a specific energy.2.2 – SolidWorks design.——————————————————————————————————–Things you […]
Posted in Mechanical Engineering, Undergraduate 
Comments Off on Professional practice and contributionrenewable energy
August 20th, 2020 Hi I have attached the description of that i want it to be done, i have also attached e-book and i want you to use it as your only resource if possible but if you used other resources please include it in the referencing list , There are also some answers of some of the […]
fuel cell and hybrid vehicles
August 20th, 2020 The topic is fuel cell and hybrid vehicles. The instructor asked me to write a matlab code and simulink for my control lecture as my final report. I am planning to do all literature survey and essay stuff but I only need a running matlab code and simulink model.
Designing a measurement and control system for a water supply system
August 8th, 2020 You are tasked with designing a measurement and control system for a water supply system (see: Figure1). Consider all of the mechanical components of the system to be already installed except the intakevalve and the pump. You must specify the pump, intake valve, any instruments you wish to use, andwhatever control logic and additional controls […]
Posted in Graduate, Mechanical Engineering Comments Off on Designing a measurement and control system for a water supply systemFinite element method of analysis (FEA)
July 16th, 2020 Hi there, I have finite element exam after 4 hour, it consists of 6 questions and I have to solve 4 of them. I have 2 days to submit my answer but I need the solution before to check it. I have attached the module syllabus and last year exam paper
Posted in Mechanical Engineering, Undergraduate Comments Off on Finite element method of analysis (FEA)
Free revisions
Free title page
Free Bibliography and Reference Pages
Free Formatting (APA, MLA, Chicago, Harvard and Others)