Pressure Drop Measurements in Turbulent Flow Over riblet grooved Surfaces in pipelines and channels

Project description
1.Dont need any introduction,
2.Write about Previous work on Pressure drop measurement over riblets
3.Please focus only on the results of Pressure Drop over Smooth and Rib Surfaces
4.Pleaser ignore anything related to heat transfer or polymer
5.Please mention what type of groove the author used and what was the dimension
6.I want it to be like story OF PREVIOUS WORK
7.Use only these references that you can download them from this link
http://www.mediafire.com/view/2n4twmd8nt555eg/aaa.rar
8.Dont use the same sequences of the reference coz I just put them randomly , but for you please organize them as story

Pressure Drop Measurements in Turbulent Flow Over riblet grooved Surfaces in pipelines and channels

Note:
1.    Don’t need any introduction,
2.    Write about Previous work on Pressure drop measurement over riblets
3.    Please focus only onthe results of Pressure Drop over Smooth and Rib Surfaces
4.    Pleaser ignore anything related to heat transfer or polymer
5.    Please mention what type of groove the author used and what was the dimension
6.    I want it to be like storyOF PREVIOUS WORK
7.    Use only these references that you can download them from this link
http://www.mediafire.com/view/2n4twmd8nt555eg/aaa.rar
8.    Don’t use the same sequences of the reference coz I just put them randomly , but for you please organize them as story
Alkhamis, N. Y. (2009). Heat Transfer and Pressure Drop Measurement for Square Channels with V-shape Ribs at High Reynolds Numbers (Doctoral dissertation, Texas A&M University).
Anderson, G. W., Rohr, J. J., & Stanley, S. D. (1993). The combined drag effects of riblets and polymers in pipe flow. Journal of fluids engineering, 115(2), 213-221.
Bixler, G. D., &Bhushan, B. (2013). Shark skin inspired low-drag microstructured surfaces in closed channel flow. Journal of colloid and interface science, 393, 384-396.
Dean, B., &Bhushan, B. (2012).The effect of riblets in rectangular duct flow.Applied Surface Science, 258(8), 3936-3947.
Olsson, C. O., &Sunden, B. (1998).Experimental study of flow and heat transfer in rib-roughened rectangular channels. Experimental Thermal and Fluid Science, 16(4), 349-365.
Enyutin, G. V., Lashkov, Y. A., Samoilova, N. V., Fadeev, I. V., &Shumilkina, E. A. (1987). Experimental investigation of the effect of longitudinal riblets on the friction drag of a flat plate. Fluid Dynamics, 22(2), 284-289.
Fink, V., Güttler, A., &Frohnapfel, B. EXPERIMENTAL AND NUMERICAL INVESTIGATION OF RIBLETS IN A FULLY DEVELOPED TURBULENT CHANNEL FLOW.
Frohnapfel, B., Jovanovic, J., & Delgado, A. (2007). Experimental investigations of turbulent drag reduction by surface-embedded grooves. Journal of Fluid Mechanics, 590, 107-116.
Gao, X., &Sunden, B. (2001). Heat transfer and pressure drop measurements in rib-roughened rectangular ducts. Experimental Thermal and Fluid Science,24(1), 25-34.
Grüneberger, R., &Hage, W. (2011). Drag characteristics of longitudinal and transverse riblets at low dimensionless spacings. Experiments in Fluids, 50(2), 363-373.
Chen, J. J., Leung, Y. C., &Ko, N. W. (1986). Drag reduction in a longitudinally grooved flow channel. Industrial & Engineering Chemistry Fundamentals, 25(4), 741-745.
Jovanovic, J., Frohnapfel, B., & Delgado, A. (2010).Viscous Drag Reduction with Surface-Embedded Grooves. In Turbulence and Interactions (pp. 191-197). Springer Berlin Heidelberg.
Nine, M. J., Lee, G., Chung, H., Ji, M., &Jeong, H. (2014). Turbulence and pressure drop behaviors around semicircular ribs in a rectangular channel. Thermal Science, 18(2), 419-430.
Kunen, J. M. G. (1984). On the detection of coherent structures in turbulent flows (Doctoral dissertation, TU Delft, Delft University of Technology).
M. TAHER A. SAIF, D. JOSEPH, O. RICCIUS, and C. CHRISTODOULOU.”Drag reduction in pipes lined with riblets”, AIAA Journal, Vol. 28, No. 10 (1990), pp. 1697-1698.
Nitschke, P. (1983). Experimental investigation of the turbulent flow in smooth and longitudinal grooved tubes. Thesis Max-Planck-Inst. fuerStroemungsforschung, Goettingen (Germany, FR)., 1.
Prince, J. F., Maynes, D., & Crockett, J. PRESSURE DROP MEASUREMENTS IN TURBULENT CHANNEL FLOW OVER SUPERHYDROPHOBIC SURFACES WITH RIBLETS.
Rohr, J. J., Andersen, G. W., Reidy, L. W., & Hendricks, E. W. (1992). A comparison of the drag-reducing benefits of riblets in internal and external flows.Experiments in fluids, 13(6), 361-368.
Truong, T. V., &Pulvin, P. (1989). Influence of wall riblets on diffuser flow.Applied Scientific Research, 46(3), 217-227.

Pressure Drop Measurements in Turbulent Flow Over riblet grooved Surfaces in pipelines and channels

Project description
1.Dont need any introduction,
2.Write about Previous work on Pressure drop measurement over riblets
3.Please focus only on the results of Pressure Drop over Smooth and Rib Surfaces
4.Pleaser ignore anything related to heat transfer or polymer
5.Please mention what type of groove the author used and what was the dimension
6.I want it to be like story OF PREVIOUS WORK
7.Use only these references that you can download them from this link
http://www.mediafire.com/view/2n4twmd8nt555eg/aaa.rar
8.Dont use the same sequences of the reference coz I just put them randomly , but for you please organize them as story

Pressure Drop Measurements in Turbulent Flow Over riblet grooved Surfaces in pipelines and channels

Note:
1.    Don’t need any introduction,
2.    Write about Previous work on Pressure drop measurement over riblets
3.    Please focus only onthe results of Pressure Drop over Smooth and Rib Surfaces
4.    Pleaser ignore anything related to heat transfer or polymer
5.    Please mention what type of groove the author used and what was the dimension
6.    I want it to be like storyOF PREVIOUS WORK
7.    Use only these references that you can download them from this link
http://www.mediafire.com/view/2n4twmd8nt555eg/aaa.rar
8.    Don’t use the same sequences of the reference coz I just put them randomly , but for you please organize them as story
Alkhamis, N. Y. (2009). Heat Transfer and Pressure Drop Measurement for Square Channels with V-shape Ribs at High Reynolds Numbers (Doctoral dissertation, Texas A&M University).
Anderson, G. W., Rohr, J. J., & Stanley, S. D. (1993). The combined drag effects of riblets and polymers in pipe flow. Journal of fluids engineering, 115(2), 213-221.
Bixler, G. D., &Bhushan, B. (2013). Shark skin inspired low-drag microstructured surfaces in closed channel flow. Journal of colloid and interface science, 393, 384-396.
Dean, B., &Bhushan, B. (2012).The effect of riblets in rectangular duct flow.Applied Surface Science, 258(8), 3936-3947.
Olsson, C. O., &Sunden, B. (1998).Experimental study of flow and heat transfer in rib-roughened rectangular channels. Experimental Thermal and Fluid Science, 16(4), 349-365.
Enyutin, G. V., Lashkov, Y. A., Samoilova, N. V., Fadeev, I. V., &Shumilkina, E. A. (1987). Experimental investigation of the effect of longitudinal riblets on the friction drag of a flat plate. Fluid Dynamics, 22(2), 284-289.
Fink, V., Güttler, A., &Frohnapfel, B. EXPERIMENTAL AND NUMERICAL INVESTIGATION OF RIBLETS IN A FULLY DEVELOPED TURBULENT CHANNEL FLOW.
Frohnapfel, B., Jovanovic, J., & Delgado, A. (2007). Experimental investigations of turbulent drag reduction by surface-embedded grooves. Journal of Fluid Mechanics, 590, 107-116.
Gao, X., &Sunden, B. (2001). Heat transfer and pressure drop measurements in rib-roughened rectangular ducts. Experimental Thermal and Fluid Science,24(1), 25-34.
Grüneberger, R., &Hage, W. (2011). Drag characteristics of longitudinal and transverse riblets at low dimensionless spacings. Experiments in Fluids, 50(2), 363-373.
Chen, J. J., Leung, Y. C., &Ko, N. W. (1986). Drag reduction in a longitudinally grooved flow channel. Industrial & Engineering Chemistry Fundamentals, 25(4), 741-745.
Jovanovic, J., Frohnapfel, B., & Delgado, A. (2010).Viscous Drag Reduction with Surface-Embedded Grooves. In Turbulence and Interactions (pp. 191-197). Springer Berlin Heidelberg.
Nine, M. J., Lee, G., Chung, H., Ji, M., &Jeong, H. (2014). Turbulence and pressure drop behaviors around semicircular ribs in a rectangular channel. Thermal Science, 18(2), 419-430.
Kunen, J. M. G. (1984). On the detection of coherent structures in turbulent flows (Doctoral dissertation, TU Delft, Delft University of Technology).
M. TAHER A. SAIF, D. JOSEPH, O. RICCIUS, and C. CHRISTODOULOU.”Drag reduction in pipes lined with riblets”, AIAA Journal, Vol. 28, No. 10 (1990), pp. 1697-1698.
Nitschke, P. (1983). Experimental investigation of the turbulent flow in smooth and longitudinal grooved tubes. Thesis Max-Planck-Inst. fuerStroemungsforschung, Goettingen (Germany, FR)., 1.
Prince, J. F., Maynes, D., & Crockett, J. PRESSURE DROP MEASUREMENTS IN TURBULENT CHANNEL FLOW OVER SUPERHYDROPHOBIC SURFACES WITH RIBLETS.
Rohr, J. J., Andersen, G. W., Reidy, L. W., & Hendricks, E. W. (1992). A comparison of the drag-reducing benefits of riblets in internal and external flows.Experiments in fluids, 13(6), 361-368.
Truong, T. V., &Pulvin, P. (1989). Influence of wall riblets on diffuser flow.Applied Scientific Research, 46(3), 217-227.